DSR Forum

DSR "Dutch Synthetic Reefing" => DSR FAQ => Topic started by: glennf on October 13, 2016, 08:31:36 pm

Title: DSR kickstart procedure
Post by: glennf on October 13, 2016, 08:31:36 pm
DSR quickstart procedure:

First walk through the "high nutrients checkpoints"!
Www.dsrreefing.com/nutrients (http://Www.dsrreefing.com/nutrient)

Install power filter. (To clean system and sandbed)
Stop with water changes. (If nutrients are very high, or you have problems with algea/cyano/dino do a 30-50% wc with DSR salt)
Do basic measurements and corrections with DSR calculator(s).
Mix stock solution KH+, CaSr.
Install and calibrate auto dosing units.
Start the baseline dosing for CarbonVS, Fe. (Make sure the sanded is clean before dosing up to prevent bacteria bloom)
Start baseline dosing for KH, CaSr when there is a deficit.
Do adviced periodic measurements and top up when necessary.
Use DSR 2.0 calculator to determine consumption and dosing amounts.

work in progres...
Title: Re: DSR kickstart procedure
Post by: admin on November 22, 2016, 11:14:14 am
Hoeveel doseer kanalen worden er effectief gebruikt?

KH, Ca, Mg
Van deze 3 macro elementen wordt het verbruik door de calculator berekend en gedoseerde naar behoefte.
Meestal staan alleen KH en Ca op de doseer pomp, omdat Mg in een volgroeide bak amper verbruikt wordt. Daarbij wordt Ca gecombineerd met Sr volgens een verhouding 50:1.

Verder staan op de doseerpomp CarbonVS en Fe. Deze controleren de  nutrients (NO3/PO4) en daarmee de stabiliteit van het systeem.

Iodine staat ook op een doseer kanaal met 0,006ppm per dag.

Samengevat staan er 5 kanalen (6stoffen) als basis doseringen:
KH, Ca+Sr, CarbonVS, Fe, iodine

Naar behoefte wordt PO4 en NO3 ook op een doseer kanaal gezet.
Dus maximaal 7 actieve kanalen...
1 reserve kanaal kan eventueel indien dat vereist is tijdelijk voor Mg worden gebruikt

De rest van de stoffen worden handmatig naar behoefte gecorrigeerd volgens deze nieuwe schema
Www.DSRreefing.com/testfreq (http://Www.DSRreefing.com/testfreq)

Happy Reefing.
Title: Re: DSR kickstart procedure
Post by: glennf on September 02, 2017, 09:13:20 am
Lees ook dit PDF bestand die is opgesteld door een startende DSR gebruiker.

http://dsrreefing.nl/forum/index.php?topic=769.msg2828.msg#2828
Title: Re: DSR kickstart procedure
Post by: glennf on March 04, 2019, 11:13:43 am
ENG: (Topic translation)

How many dosing channels are actually used?

KH, Ca, Mg
Of these 3 macro elements the consumption is calculated by the calculator and dosed as needed.
Usually only KH and Ca are on the dosing pump, because Mg is barely consumed in a full-grown reeftank. Ca is then combined with Sr at a ratio of 50: 1.

Further on the dosing pump CarbonVS and Fe. These control the nutrients (NO3 / PO4) and thus the stability of the system.

Iodine is also on a dosing channel with 0.006ppm per day.

In summary, there are 5 channels (6 substances) as basic dosages:
KH, Ca + Sr, CarbonVS, Fe, iodine

PO4 and NO3 are also placed on a dosing channel as required.
So up to 7 active channels ...
1 spare channel can be temporarily used for Mg if required

The rest of the substances are corrected manually according to need, according to this new scheme
[url = http: //Www.DSRreefing.com/testfreq] Www.DSRreefing.com/testfreq [/ url]

Happy Reefing.